View Mobile No.

Send Email

Welding Cloth

Prominent & Leading Manufacturer from Ahmedabad, we offer signature fire resistant fiberglass fabric, signature welding cloth, signature ceramic fiber cloth, signature high heat alumina- silicate ceramic fiber cloth and signature ceramic fire welding curtain.
Signature Fire Resistant Fiberglass Fabric
  • Signature Fire Resistant Fiberglass Fabric
  • Signature Fire Resistant Fiberglass Fabric
  • Signature Fire Resistant Fiberglass Fabric

Signature Fire Resistant Fiberglass Fabric

Product Price: Rs 140 / Square MeterGet Best Price

Minimum Order Quantity: 100 Square Meter

Product Details:
Material100% Fiberglass Fabric, Fiberglass Thread, Fire Resistant Tabs
ApplicationFire Blanket, Insulation, etc...
ColorWhite
PackagingBag
Refractory Temp.550
Fabric WeavePlain or Satin Weave
Melting Point850
Shelf Life12 Month
Temperature Resistance550 C
Quantity Per Pack10 Nos
Thickness0.43 mm
Weight430 g/sqm
Service Temperture550 Celsius Degree
Normal available packing:
  • Inner packing: Wall mountable Nylon bag (pouch), wall mountable rigid box(container)
  • Heat shrink, Color box, blister card, clam shell
  • Outer packing: 5 layer corrugated carton

Using Instruction:
  • Place the product on the wall at a easily noticed and reached location or inside a drawer.
  • When fire accident occurs, quickly take out the product with both hands pulling the 2 black tapes.
  • Open up the product and hold it in your hand as if you are holding a shield.
  • Use the product to cover up the fire lightly and at the same time, cut off electricity or gas.
  • While the product is covering up the fire, use other measures to distinguish the fire until it is completely off.
  • After the fire has been completely distinguished, take off the product when it has been cooled down and treat it as an inflammable trash
  • In case the clothes of a person are on fire, please wrap the person with the product to distinguish the fire and call #120 immediately

Important Notes:
  • Firmly fix the product in an easily noticed and easily reached location (e. G. Back of the entrance door, inside the cabinet of your bed head, inside the cabinet of your kitchen, trunk of your car etc. )
  • Inspect the product every 12 months.
  • In case any damages or dirt observed on the product, please replace it immediately.


Additional Information:

  • Item Code: DSZSG007
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Ahmedabad,Gujarat,India
  • Production Capacity: 2000
  • Delivery Time: Ready Stock Avaliable
  • Packaging Details: 50 or 100 Meter Per Roll. 100% Dust Free Packing. As Per Your Requirements. Every Bag wills Be At Best Quality Packing. Per Roll will be Pack in a Plastic Packaging.
Get Best QuoteRequest Callback
Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth
  • Signature Welding Cloth

Signature Welding Cloth

Product Price: Rs 90 / Square MeterGet Best Price

Minimum Order Quantity: 100 Square Meter

Product Details:
MaterialGlass Fiber
ColorWhite
SizeCustomized
Packaging TypeRoll Packing
Width1 m,1.2 m,1.5 m
BrandSignature
CoatingSilicon,PTFE,Vermiculite
HSN Code70191900
Weight100 gsm to 4000 gsm
Temperature250 C to 750 C
Quantity Per Pack100 Meter Per Roll
GradeGrade - E
DesignSatin,Twill,Plain
Is It WaterproofWaterproof
GSM ServicesYes
Thickness0.1 mm - 5.0 mm
Weave TypePlain Woven
Fiberglass fabric cloth is an engineering material, which has many excellent characteristics, such as anti-burning, corrosion resistant, stable structure, heat-isolating, minimum elongated shrinkage, high intensity.

This new material product has already covered many domains such as electric appliance, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention, and environmental protection, et...

According to fabric organization structure and appearance, there are such kinds of products: plain weave, twill weave, satin weave.


Reinforced Fiberglass Cloth is made of high strength E glass fiberglass yarn, with plain or twill weaving style. It can be compatible with polyester, epoxy, and vinyl ester resins, and is widely used in aircraft and spaceflight industry, ship industry, chemical industry, medical industry, military industry, and sports goods, etc. It can be used to produce golf pole, surfboard, sailboard, boat hull, FRP tank, swimming pools, car bodies, FRP pipe as well as other FRP products.



Additional Information:

  • Item Code: DSZSG008
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Ahmedabad, Gujrat, India
  • Production Capacity: 5000
  • Delivery Time: Ready Stock Available
  • Packaging Details: 50 or 100 Meter Per Roll. 100% Dust Free Packing. As Per Your Requirements. Every Bag wills Be At Best Quality Packing. Per Roll will be Pack in a Plastic Packaging.
Get Best QuoteRequest Callback
Signature Ceramic Fiber Cloth
  • Signature Ceramic Fiber Cloth
  • Signature Ceramic Fiber Cloth
  • Signature Ceramic Fiber Cloth

Signature Ceramic Fiber Cloth

Product Price: Rs 280 / Square MeterGet Best Price

Minimum Order Quantity: 30 Square Meter

Product Details:
Fiber Length30 Meter
Usage/Applicationwelding blankets,stress relieving,removable insulation covers,fire blankets,fire curtains,etc..
Temperature1260
Fabric TypePlain
Max Withstanding Temperature1700 C
Packaging TypeRoll Type
Width1000 - 2000 mm
Patternplain
Packaging Size30 x 1 Meter
ColorWhite & Brown
Thickness1.5 mm to 5.0 mm
Weight1 kg to 2 Kg
Fiber Diameter2 - 5 um
HSN Code6908
Quantity Per Pack30 Meter
ShapeRound
GradeGrade - A
Thermal Conductivity0.20 (W/m.k)
Warp Density48-60 Piece/10cm
Product TypeCeramic Fiber
Weave TypePlain
ReinforcedCeramic Fiber Pure
BrandSignature
Weft Density21-30 Piece/10cm
Strength0.09 mpa
Heat Insulation application ceramic fiber cloth

1.Thickness:1.5~5mm

2.Width:1~1.5m

3.Working Temperature: 1000C

4.Thermal Conductivity: 0.20 (W/m.k)

 

It is a woven fabric made of our high-quality ceramic fiber yarns. It can be used for high-temperature applications up to1000° C. The cloth is reinforced with fiberglass filament and optional stainless steel wire. It contains a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

 

Specification:


Reinforcement

weave

Temp. resistance (C degree)

Thickness (mm)

Width (m)

Optional treatment

1

glass filament

plain

650

1.5up to 5mm

1 and 2

with Aluminium foil

2

glass filament+s.s.wire

plain

1000

1.5up to 5mm

1 and 2

 

Application:

It can be used as expansion joints, safety blankets, curtains, welding blankets, protective and insulating covers, shields, gaskets, cable or pipe wrapping, etc. It has been widely used in welding, foundry works, aluminum and steel mills, boiler insulation, and seal, shipyards, refineries, power plants and chemical plants



Additional Information:

  • Item Code: DSZSG005
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Ahmedabad,Gujarat,India
  • Production Capacity: 30 ton
  • Delivery Time: Ready Stock Avaliable
  • Packaging Details: 30 Kg OR 50 Kg per Roll Weight. 100% Dust Free Packing. Every Bag wills Be At Best Quality Packing. Per Roll will Be Pack in a Plastic Packaging. Thickness, weight & Meter Detail's Be on an Each & Every Roll's.
Get Best QuoteRequest Callback
Signature High Heat Alumina- Silicate Ceramic Fiber Cloth
  • Signature High Heat Alumina- Silicate Ceramic Fiber Cloth
  • Signature High Heat Alumina- Silicate Ceramic Fiber Cloth

Signature High Heat Alumina- Silicate Ceramic Fiber Cloth

Product Price: Rs 450 / Square MeterGet Best Price

Product Details:
Usage/Applicationwelding blankets,stress relieving,removable insulation covers,fire blankets,fire curtains,etc..
Temperature1260 C
Fabric TypePlain
Widthcustomized
Sizecustomized
ColorWhite
Thickness1.5 mm to 5.0 mm
HSN Code6809
Yarn TypeCeramic Fiber
Theoretical Density500 +- 15kg/m3
Classification Temperature1260 Celsius
Work Temperature750 Celsius
Basic MaterialFiberglass Reinforced
Organic ContentLess Than or Equal 15 %
High Heat Alumina- Silicate Ceramic Fiber Cloth is reinforced with fiberglass filament, Ceramic fiber textiles (cloth, tape and rope) contain a certain amount of binder material which is normally burnedat lower temperature and does not affect the insulation property. It is featured with heat insulation and high temperature protective materials in all kind of thermal installations and heat-conducting systems, widely used in welding, foundry works, aluminum and steel mills, boiler insulation and seal, power plants and chemical plants.

Other Details:
  • Lightweight and low thermal conductivity.
  • Resists corrosive chemicals, commonly used acid and alkali.
  • Strong and abrasive. It can be used in tough environment.
  • Good substitute of asbestos products in many insulation and sealing applications.
  • Reinforcing material: glass fiber wire, stainless steel wire, glass fiber and stainless steel wire
  • Heat insulation furnace curtain, large area thermal insulation.
  • Radiant heat shielding, flexible fabric expansion joints for high temperature piping.
  • Safety blankets, welding blankets, protective and insulating covers, gaskets, cable or pipe wrapping, etc


Additional Information:

  • Item Code: DSZ-0363
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Ahmedabad,Gujarat,India
  • Delivery Time: 1-2 Days
  • Packaging Details: 50 or 100 Meter Per Roll. 100% Dust Free Packing. As Per Your Requirements. Every Bag wills Be At Best Quality Packing. Per Roll will be Pack in a Plastic Packaging.
Get Best QuoteRequest Callback
Signature Ceramic Fire Welding Curtain
  • Signature Ceramic Fire Welding Curtain
  • Signature Ceramic Fire Welding Curtain

Signature Ceramic Fire Welding Curtain

Product Price: Rs 350 / MeterGet Best Price

Minimum Order Quantity: 30 Meter

Product Details:
MaterialCeramic Fiber
BrandSignature By DSZ
Width1m to 20m
Temp1260 C
Lenght30m
Melting Point1760 C
CoatingVermiculite
For years we have been delivering a large variety of Ceramic Fire Welding Curtain to our vast customers base across the nation. This item is used in many small to big industries. Our quality experts stringently verify the entire procured range on various quality grounds to ensure its flawlessness prior to its final supply. We also cater to the urgent and bulk needs of our clients.

Features :
  • Rust proof
  • High crack strength
  • Easy to use


Additional Information:

  • Item Code: DSZ-0481
  • Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
  • Port of Dispatch: Ahmedabad, Gujrat, India
  • Production Capacity: 500 Meter
  • Delivery Time: 1-2 day
  • Packaging Details: 50 or 100 Meter Per Roll. 100% Dust Free Packing. As Per Your Requirements. Every Bag wills Be At Best Quality Packing. Per Roll will be Pack in a Plastic Packaging.
Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Welding Cloth"?
Thank you Your Enquiry has been sent successfully.
© Darshan Safety Zone. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.